THIS PRODUCT HAS BEEN DISCONTINUED AND IS NO LONGER AVAILABLE
FULL WIRELESS SYSTEM REPLACEMENT IS REQUIRED
PLEASE REFER TO THE BELOW PART NUMBERS FOR NEW WIRELESS SYSTEM:
- WORCS201 (Wireless Receiver)
The WORCS is a wireless control system that will allow you to control 4 outputs, which are N/O. One of the outputs
can be switched to N/C if needed. These outputs can be changed to positive or negative by changing the internal fuse location
in the receiver with a maximum positive output of 15 amps. The receiver is programmable to send either a pulse or a latch signal.
The transmitters are programmed to the receivers by using a computer with a Windows operating system.
By following the WORCS Manual you can set up the Windows Hyper Link software to allow you to program up to 6 transmitters
for each receiver.
The hand held transmitters have a range of approximately 200 feet depending on any physical obstructions that might impede
the signal reception.
The WORCS can control what you would
have normally controlled before with an on/off toggle switch, such as
- PTO Pump
- Engine RPM
- Valve Open/Close
- Solenoids
- Engine Start/Stop, etc..
This system comes with a one year manufactures limited warranty.
WORC101 - 4 Channel Wireless Output Remote Control
- Brands RPM Control Company
- Product Code:WORC101
- Availability:100