The EDRJ200 has the capability to control the engine RPM from a Analog input such as a Foot Pedal or Hand throttle. It also has 2 programable Set RPM, Engine Start, Engine Shutdown and PTO protection.The great feature of this module is that the engine ECM does not need to be programmed for the EDRJ200 to work.

Other Features can be added such as Auto Neutral, PTO Enable, Throttle Limitation, Road Speed Limiting, Engine Running, Neutral Start, Engine Running No Start.

The programming is done through software that communicates with the EDRJ200. The software is used to program the max RPM and the two set RPM speeds. We have also added four different interlocks that can be turned on or off, they monitor whether the vehicle is in neutral, if the parking brake is applied, service brake applied and if there is any road speed. This information has to be on the J1939 to be able to utilize these features. A PTO safety features is included in the EDRJ200, which protects your PTO from being run at a RPM that is above the rated speed. The software is used to program the maximum kick out speed and reengagement of the PTO. 

Basic Features: Foot Pedal/Hand Throttle RPM, Two Set RPM Speeds, PTO Protection, Engine Starting, Engine Shutdown.

Additional Features: Roadspeed Limiting, Throttle Limitation, Auto Neutral Output, and Engine Running Output.

The Features can be Customize to whatever your application needs.

The Software can be purchased.

The EDRJ200 works on most J1939 electronic engines